DBY electric diaphragm pump - cycloidal type DBY series electric diaphragm pump is a new type of pump. In recent years, breakthroughs have been made in diaphragm material. The pump is used in petrochemical, ceramic, metallurgy and other industries. The main feature of this pump is that it does not need to inject water, and its self-priming capacity is more than 7 meters. Particles and slurries with a diameter less than 10 mm can pass easily. Because the diaphragm will be separated by the conveying medium and the transmission mechanical parts, the medium will not leak outward, and the pump itself has no shaft seal, so the service life is greatly prolonged. According to different media, the diaphragm is divided into chlorohydrin rubber, fluororubber, NBR, etc., which can fully meet the requirements of different users.

Product use

1. Pumping peanut butter, pickles, mashed potatoes, small red sausage, jam, apple puree, chocolate, etc.

2. Pump paint, gum, pigment.

3. Adhesive and glue and other bell class can be pumped.

4. All kinds of glaze paste of tile, porcelain, brick and pottery.

5. After the well is drilled, the sediment is pumped and grouted.

6. Pump all kinds of sewage.

7. Pump various emulsions and fillers.

8. Pump is used to clean the oil tanker and barge and absorb the sewage in the warehouse.

9. Hops and fermentation powder slurry, syrup, molasses.

10. Pump water in mine, Kang Road, tunnel, mineral processing and slag.

11. Pump suction cement grouting and mortar, all kinds of rubber mortar.

12. All kinds of abrasives, corrosive agents, oil and mud, cleaning oil dirt and general containers.

13. All kinds of highly toxic, flammable and volatile liquids.

14. All kinds of strong acid, strong alkali, strong corrosive liquid